Chicken manure extruder cow dung manure crushing machine dewatering machine / excellent cow manure dewater machine in other farm machines/commercial animals manure dewater separator
1. Introduction of the manure dewatering machine :
Screw dewatering for animal manure is mainly composed of control cabinet, pipeline, pumps,body, mesh screen, main motor , reducer, Feed inlet, water outlet , dry material outlet and other parts. This equipment is widely used and has been widely used and ecognited in the market.
1. The screw solid-liquid separator dewatering machine has small volume, low speed, simple operation, convenient installation and maintenance, low cost, high efficiency, fast investment recovery and no need to add any flocculant. The weight of the whole machine is nearly half a ton and the dimensions are small.
2. The separated solid part is dry and odorless. It is a good farmland fertilizer. It does not produce leachate during storage. It is convenient to transport and store. It can effectively improve the air environment of livestock farms and solve the problem of solid manure transportation environmental pollution.
2.Technical parameters of manure dewatering equipments:
Model |
FX-180 |
FX-200 |
FX-280 |
Voltage |
380V |
380V |
380V |
Power |
4kw |
4kw |
5.5kw |
Machine Size |
2000*600*1300mm |
2200*610*1350mm |
2400*800*1300mm |
Weight |
340kg |
510kg |
680kg |
Capacity |
10-15 M³/H |
15-20 M³/H |
20-25 M³/H |
Screen inner diameter |
180mm |
200mm |
280mm |
Feed inlet diameter |
76mm |
76mm |
76mm |
Water outlet diameter |
110mm |
110mm |
110mm |
Body Material |
Carbon steel & 304 stainless steel |
Nodular cast iron& 304 stainless steel |
Nodular cast iron& 304 stainless steel |
3. Scope of application of manure dewater machinery:
It maily dewatering animal manure (such as pig manure, cow dung).Dung dewater can separate the animal dung into liquid organic fertilizer and solid organic fertilizer.
Usually, manure after dewatered is like sand. It is scattered when you grab it with your hand.
After separation, the water content of the liquid portion is about 60%, and crusts and precipitation are not easy to occur during storage. The separated liquid has less nitrogen and phosphorus content, which can be diluted for irrigation water or fertilizer, and can be effectively used by agricultural crops absorb
4. working principle:
It separates the moisture and the animal manure by screw extruding extrusion technology.
First, When the cutting feed pump pushs the animal manure to the screw dewatering machine through the pipeline, the dewatering machine start to work.
The screw gradually pushes the animal manure to the front of the body. And at the same time, increases the pressure, forcing the moisture in the raw material to squeeze out from Mesh screen, flowing out of the drain pipe.
In order to grasp the discharging speed and moisture , the adjusting device in front of the main machine can be adjusted to achieve your requiremnet.
The following parts are included for the above models:
01/ One pump(pump details are above)
02/ One control cabinet
03/ One main motor
04/ One reducer
05/ One backwater outlet
06/ One feed inlet
07/ One mobile universal wheel
08/ One viewport
09/ One dry material outlet
10/ One discharge outlet pressure valve
5. Features and advantages :
(1) Save space , Low speed, operate easily , low cost,fast investment recovery, environmental protection, low power consumption, suitable for continuous operation.
(2) The material of important parts are304 stainless steel, such as screw, screen, etc.
Screw : 304 stainless steel, 8mm thickness blade, corrosion protection, wear resistant .
Screen mesh : 304 stainless steel, 0.3-2mm models for your choice .
1. Packing: PP film wrapped around the machine and carefully packed in wooden case to focus on protecting damageable parts.
2. Shipping: From port of Shenzhen, Shanghai, Qingdao, Guangzhou, etc. We also accept land, air, sea transport and internationalmultimodal transport.
3. Clearance: Our long history makes us the one of the first and most knowledgeable providers of the equipment, our main customers hail from; Canada, the United States, Brazil, Argentina, Japan, Philippines, Australia, Russia, Thailand, the UAE, Poland, Spain, Germany, India, etc.
1. We always welcome customers to visit our manufacturing factory and get to know more about us.
2. Customers can see all the manufacturing workflows when they visit our factory. you can contact with online besides offline: Wechat / WhatsAPP / iMessages: 008615503747612
3. We also send engineers to the customer's place to help with the installation!
1. Ask: What is your guarantee of machine ?
Contact Person : | Kainan |
---|